Go Back to "Welcome!" Screen Automatically
If the manager password has been entered and then no button is pressed within 30 seconds, the
screen will go back to the "Welcome!" screen
If a Subcriber ID is entered and no button is pressed within 6 seconds, the screen will go back to
the "Welcome!" screen.
If no button is pressed within 30 seconds, while in the Manager or Subscriber options, the screen
will go back to the "Welcome!" screen.
SIM Card
If the SIM card is not inserted, the screen will show "SIM not inserted" when the system is turned
on.
Call Manager
If a "Manager Phone #" has been programmed, the system will directly dial this number when the
visitor presses the CALL button at the "Welcome!" screen.
If a "Manager Phone #" is not stored, no action will result by pressing the CALL button
Screen Saver
To save power and promote the longevity of the screen, after 30 seconds of standby, the screen
will turn off automatically.
Master Reset
The following sequence will bring the unit back to factory defaults. Please note that this will erase
all passwords, phone numbers, and subscribers.
At the "Welcome" screen, press C, UP, UP, UP, DOWN, DOWN, DOWN, CALL buttons in
sequence. It will say "Initial System Please Wait...", then all is back to square one.
SIM not Inserted
15