Table of Contents
Advertisement
Subscriber:
The Subscriber function of the GSM Intercom Door / Gate Entry System gives the ability to set up multiple
tenants and enable the user to press a subscriber number followed the by the CALL button to connect with the
tenant. A Subscriber ID # can be from 1 to 6 digits in length. There is a maximum of 263 subscribers which can
each have 2 phone numbers programmed.
The first registered phone number will be the first number that the GSM Intercom Door / Gate Entry System will
call. If the first registered number is busy or no one answers the call, the door phone will automatically dial the
second registered number. We suggest that the first number be the home phone number and the second number
be a mobile phone number.
Setup Subscriber ID Number
Subscriber Setting
Select the Subscriber menu option and press the CALL button
You can choose from 1 digit to 6 digits for the Subscriber ID.
Enter Subscriber ID "_____" and press the CALL button
Select Yes to add the new Subscriber ID and press the CALL button
Select 1 to add a phone number press the CALL button
Enter a phone number with area code, then press the CALL button to save
Press the MENU button to exit
Enable or Disable the Subscriber ID Number
Subscriber Setting
Select Subscriber menu option and press the CALL button
Enter the Subscriber ID # in which you wish to Enable or Disable
Select Enter Subscriber ID # and press the CALL button
Select Status: and press the CALL button to select "Normal" or "Inhibit"
To Enable the Subscriber ID select "Normal"
To Disable the Subscriber ID select "Inhibit"
Press the MENU button to return to the previous options screen and the last setting will be saved.
If "Inhibit" is selected, the number dialing will be not allowed. And, the screen will show "Contact
with Manager".
If "Normal" is selected, the number can be dialed normally.
Enter Subscriber ID
Enter Subscriber ID
Contact with
Manager
13
Advertisement
Table of Contents
