Table of Contents
Advertisement
•
Pay attention to all warning labels and instructions printed on the
exterior of your fog machine.
•
Never let the fogger close up to any flame, flammable or explosive
substance to avoid fire and explosive.
•
Use only high-quality liquid or suitable dealer recommended fog fluid.
•
Always make sure there is sufficient liquid in the
tank. Operating this unit without liquid may cause permanent damage to
the machine.
2. Unpacking & Inspection
•
Open the shipping carton and verify that all equipment necessary to
operate the system has arrived intact.
•
Your
fog machine should be accompanied by the following items:
1.
This user manual!
2.
Power cord
3.
Multi-function remote control with attached cord
•
If any equipment is missing contact your
•
Please also contact your vendor when you find any destroyed or
omitting parts.
•
Before beginning initial setup of your
is no evident damage caused by transportation. In the event that the
unit's housing or cable is damaged, do not plug it in and do not attempt
to use it until after contacting your fog machine dealer for assistance.
3. Setup
•
Remove all packing materials from the shipping box. Check that all
foam and plastic padding is removed.
•
Place the fog machine on a flat surface and remove liquid tank cap.
•
Pour high quality fog liquid into the liquid tank, being careful not to
exceed the maximum fluid level. DO NOT OVERFILL. Use only our
Fogger Liquid or other dealer-recommended high-quality fog fluid. Any
other types of fluid can damage the unit. When the container is full,
place the cap back on the liquid tank and tighten.
•
Your fog machine can only be operated by connecting the remote
control supplied into the remote control slot in the back of the machine.
fog machine dealer immediately.
fog machine, make sure that there
- 3 -
fog machine liquid
Advertisement
Table of Contents
