Using A Conversion-Loss Data Disk With The Esa Or Psa Series Analyzers; Loading Data; Viewing Data - Agilent Technologies 11970 Series User Manual

Using a Conversion-Loss Data Disk with the ESA or PSA
Series Analyzers
The conversion-loss data for your mixer can be quickly loaded in the memory of an ESA or
PSA series analyzer from a floppy disk. The following process works with the floppy disk
provided by the factory with your new mixer, or with one that you have stored the
correction data. This process eliminates the time consuming and sometimes error-prone
process of manually entering the data from a table.

Loading Data

1. Insert the conversion-loss data disk (from the factory or your own) into the floppy drive
of the analyzer.
2. Press , then
File Load
3. Press , , then select
Type More
4. Press
Directory Select
5. Use the down arrow to select the file. The factory supplied disk has a file with the OTH
extension which places the data in the corrections set "other" location.
6. Press to load the conversion loss values into the correction table of the
Load Now
analyzer.

Viewing Data

1. Press ,
Amplitude More
2. Use the front-panel knob or up/down arrows to scroll through the list of correction
values.
Chapter 2

Using a Conversion-Loss Data Disk with the ESA or PSA Series Analyzers

.
.
Corrections
, highlight drive -A-, then press
, , (ON) and
Corrections Other
again.
Directory Select
to view the correction values.
Edit
Operation
21