BEA WebLogic User Manual page 142

Part VI Diagnostics
View Diagnostic Information
Diagnostic messages, and any error messages produced if the request fails, are displayed in the
Diagnostics panel.
Standard Attributes Provided with Diagnostic Output
Attribute
Incoming URL
Device Pattern
Device
Session ID
Interception: Use the Diagnostics Console as a Proxy
The Diagnostic Console can be used as a proxy, so that requests can be sent from a device or
emulator, passed through the Diagnostic Console and on to WebLogic Mobility Server. The
response is then returned through the console to the device.
Using the Diagnostics Console as a Proxy
If bypass patterns have been specified in the Diagnostic Console settings panel, these will still
pass back and forth through the proxy, but the output will not be displayed. In other words,
requests for images will not generate diagnostic messages. For example, a page might contain two
images and text, so you could specify that the image request / responses are not trapped. If the
page had a style sheet (CSS) associated with it, you could also specify this as a bypass so that it
gets passed through.
138 - BEA WebLogic Mobility Server User Guide
Description
This is the URL of the incoming request to WebLogic Mobility Server. For example,
199.168.5.30:7001/login.jsp
This is the matched device pattern. For example root^WML^ericssonr380
This is the identified device.
For example, EricssonR380
This is the session id.