BEA WebLogic User Manual page 104

Part IV Presentation of Mobile Content
attribute set to "base-transform" the table data is extracted from the rows (or columns)
and paired with the data from the headlocation in a "table header: table data" pairing.
Table Flattened: sdtransform="base transform"
Image Courtesy of Openwave Systems Inc
•
sdtransform="on-same-card"
This is used to display new tables on the same card.
Note: This will not create a link to that nested table
•
sdtransform="on-new-card"
This is used to create a link to a nested table that is placed on a separate card
•
tabletype="normal | group" (required attribute)
If the attribute
tabletype
display the entire table. If the table is bigger than what can fit onto a "card", the page will be
broken into multiple cards.
Setting
tabletype
can be navigated to view detailed table content presented in a flattened "table header: table
data" pairing.
Using
tabletype="group"
table is first "flattened" using
The following graphics illustrate the use of tabletype="group", where the table has been
rendered with the headers as links to "flattened" tables
Table with tabletype="group" - Entry Link
100 - BEA WebLogic Mobility Server User Guide
is set to "normal", WebLogic Mobility Server will attempt to
to "group" causes the table headers to be rendered as links. These links
for a device that can render tables will have little effect unless the
sdtransform
.