BEA WebLogic User Manual page 117

2. In the right pane, move the pointer over Operations and click Add.
The Add a new IP/Domain pane opens where you enter information for the IP/Domain
in four fields, as shown in the following image. You must select a type of restriction
from a drop-down list before you can enter information in the IP(Mask)/Domain field.
a. From the Type drop-down list, select the type of restriction.
b. In the IP(Mask)/Domain field, type the IP or domain name using the following
3. From the Access Control drop-down list, select Grant to permit access or Deny to
restrict access for the IP addresses and domain names you are adding.
BEA WebLogic Adapter for SAP User's Guide
guidelines.
If you select Single (Computer) from the Type drop-down list, you must provide
the IP address for that computer. If you only know the DNS name for the computer,
click DNS Lookup to obtain the IP Address based on the DNS name.
If you select Group (of Computers), you must provide the IP address and subnet
mask for the computer group.
If you select Domain, you must provide the domain name, for example,
yahoo.com.
Using Integration Business Services Policy-Based Security
6-11