RSF Woodburning Fireplaces ONYX AP Owner's Manual page 27

Residential factory built fireplace
Table of Contents

Advertisement

6. Follow the instructions supplied with your gas log set concerning the installation of gas lines, shut-off valves,
etc. If you have the sand pan type of gas log set that covers the air holes, place some of the firebrick, or some
other suitable non-combustible material around the edges of the sand pan to raise the gas log set above the
air holes.
Maximum gas input: 40 000 BTU
There are no minimum clearances to the sides or top of the firebox. However, any clearances stated by the gas
log set manufacturer must be maintained.
You may install the gas valve inside the firebox if the gas log set manufacturer allows this in its instructions, and
the required clearances are met.
Rear refractory
Gas valve
over larger air
hole
Gas log air
holes
Figure 34 : The gas log option
ONYX AP Owner's Manual
Onyx AP firebox with firebrick
and metal plates removed
27
Secondary air
pipes
Side
refractory
Gas line
RSF Woodburning Fireplaces

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents