Ipod ® (Optional); Playback - Alpine CDA-9883R Owner's Manual

1
Select the assigned function by turning the Rotary
encoder.
(e.g. Select SOURCE)
POWER SOURCE
PAUSE MUTE BWD
A.PROC POWER
FF SOURCE FF
2
Press the steering remote control button until the
changed signal value of steering remote control
appears in the left of the display.
(e.g. Press SOURCE of the steering remote control button.)
The changed steering remote control signal appears in the
left of the display.
DE SOURCE FF
The changed signal value of steering remote control
3
Press / /ENT to execute the setting value.
The confirmed signal value of steering remote control
appears in the right of the display. With doing so, the
function of the unit is assigned to the steering remote
control button.
DE SOURCE DE
The confirmed signal value of steering remote control
4
Repeat steps 1 to 3, and set each button.
When settings have been completed, press AUDIO/RTN to
return to the previous mode.
22
-EN
BAND VOL. UP VOL. DN
FWD P. UP P. DN
®
iPod (Optional)
Rotary encoder
/
/ / SOURCE
ENT
ESC AUDIO/RTN
/
®
An iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
• Set AUX Setup to OFF when an iPod is connected (refer to "Setting
the AUX Mode" (page 21).
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver. 1. 2.1
iPod mini: Ver. 1. 4.1
iPod nano: Ver. 1.2
• The unit cannot be used with software versions earlier than
"2006-06-28". For details about "iPod Software Update", refer
to the iPod Instruction Manual.

Playback

1
Press SOURCE/
to switch to the iPod mode.
TUNER DISC iPod*
1
* Only when the iPod is connected.
2
* Only when the CD changer is connected.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
4 5 6
Preset buttons
TITLE
(1 through 6)
1 2
CHANGER* TUNER