Ipod (Optional); Playback; Searching For A Desired Song - Alpine CDE-9882RSi Owner's Manual

iPod (Optional)

/
SOURCE/
/ENT
Rotary encoder
VIEW
/ESC
An iPod can be connected to this unit by using the proprietary ALPINE
FULL SPEED™ Connection Cable (KCE-422i) (supplied). When this
unit is connected by using the cable, the controls on the iPod are not
functional.
• Set AUX+ SETUP to OFF when an iPod is connected (refer to
"Setting the AUX+ SETUP Mode" on page 20).
• If the BLUETOOTH INTERFACE and an iPod are connected at the
same time, be sure to disconnect the iPod from the BLUETOOTH
INTERFACE while turning ACC to OFF.
iPod usable with this unit
• The unit can be used with the following iPod.
iPod nano (2nd generation)
iPod with video
iPod nano (1st generation)
iPod with color display
iPod with Click Wheel
iPod mini
• This unit does not support video playback from iPod, even
using a video-compatible cable.
• If the unit is used with iPod software versions of iTunes earlier
than 7.1.0.59, correct function and performance are not
guaranteed.

Playback

1
Press SOURCE/ to switch to the iPod mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO
3
BT AUDIO* TUNER
1
* Displayed only when the iPod is connected and AUX+ SETUP is set
to OFF, refer to "Setting the AUX+ SETUP Mode" (page 20).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 20).
3
* Only when BLUETOOTH IN is set to ADAPTE, refer to "Setting the
BLUETOOTH Connection" (page 18).
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
4 5
6
Preset buttons
(1 through 6)
1 2
iPod* /AUX+*
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
3
To pause playback, press
Pressing / again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing
• An episode may have several chapters. The chapter can be changed
by pressing or .

Searching for a desired Song

An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organised in playlists, this unit's search
functions will ease song searches. Each music category has its own
individual hierarchy. Use the Playlist/Artist/Album/Song/ Podcast/
Genre/Composer/Audiobook search mode to narrow searches based on
the table below.
Hierarchy 1 Hierarchy 2
Playlist Song
Artist* Album*
Album* Song
Song —
Podcast Episode
Genre* Artist*
Composer* Album*
Audiobook —
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press /ENT to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST
search mode, and then press
PLAYLIST ARTIST
GENRE COMPOSER
3
Turn the Rotary encoder to select the desired
Artist, and then press
4
Turn the Rotary encoder to select the desired
Album, and then press
/ .
or .
Hierarchy 3 Hierarchy 4
— —
Song —
— —
— —
— —
Album* Song
Song —
— —
/ENT.
ALBUM SONG PODCAST
PLAYLIST
AUDIOBOOK
/ENT.
/ENT.
21
-EN