Attaching Power - Argox CP-2140 User Manual

Attaching Power

1. Make sure the printer‟s power switch is in the off position (down).
2. Insert the AC power cord into the power supply.
3. Insert the power supply‟s power connector into the printer‟s power
jack.
4. Plug the other end of the power cord into an appropriate grounded
AC electrical outlet.
Warning:
Do not operate the printer and power supply in an area where they
might get wet.
Power Jack
Power
Connector
Power Supply
CP-2140, CP-2140Z, CP-3140
Compact Printer Series - User‟s Manual
12
Power Cord