Painting The Speakers; Speaker Specifications - Proficient Audio Systems C870 Owner's Manual

PAINTING THE SPEAKERS

If you plan to paint your speakers, we recommend that it be
done prior to installation. If you plan to paint your speakers
sometime in the future, it is best to remove them by simply
reversing the steps for "SPEAKER INSTALLATION" above.
Before painting your speakers, install the included paint mask
in place of the grille.
Before painting the grilles, remove the white acoustic
blanket under the grille.

SPEAKER SPECIFICATIONS

Woofer:
Tweeter:
Woofer/Tweeter Bridge
Contour Switches
Power Handling:
Frequency Response:
Impedance:
Sensitivity:
Diameter x Depth:
Ceiling Cut Out:
Woofer:
Tweeter:
Woofer/Tweeter Bridge
Power Handling:
Frequency Response:
Impedance:
Sensitivity:
Diameter x Depth:
Ceiling Cut Out:
Features and specifications are subject to change without notice.
C870
8" Kevlar® Cone
1" Pivoting Aluminum Dome
Fixed at 15˚ Angle
±3dB Bass & Treble
175 Watts
28Hz - 22kHz
8Ω
92dB 1W/1m
111/8" x 57/8"
97/8"
C660
61/2" Graphite Cone
1" Pivoting Aluminum Dome
Fixed at 15˚ Angle
125 Watts
36Hz - 22kHz
8Ω
92dB 1W/1m
91/4" x 49/16"
81/4"
Once the speakers have been painted, return the acoustic
blanket back into place.
Great care should be taken not to clog the holes of the grille,
as this will reduce the sound quality of the speakers.
Proficient recommends only light spray painting using 5 parts
thinning agent to 1 part paint.
C840
8" Graphite Cone
Pivoting 1" Silk Dome
Fixed at 15˚ Angle
±3dB Bass & Treble
150 Watts
40Hz - 22kHz
8Ω
92dB 1W/1m
111/8" x 57/8"
97/8"
C650
61/2" Polypropylene Cone
1" Pivoting Silk Dome
Fixed at 15˚ Angle
100 watts
45Hz - 20kHz
8Ω
91dB 1W/1m
91/4" x 49/16"
81/4"
3