Table of Contents
Advertisement
Other
Job cannot be perfect-bound error scenario
Introduction
In some case a perfect bound book cannot be handled by the perfect binder. An error
scenario is given on the operator panel.
When to do
Error scenario is present on the operator panel.
Solve the perfect-bound error scenario
Put the printer on hold to prevent it from sending the job again after the error has been
1.
solved. See the manual of the printer how to do this.
Touch 'OK' to proceed.
2.
Delete the job, or move the job to the 'Waiting jobs'. In the latter, case you can disable
3.
perfect binding.
Open job properties and disable perfect binding. See the manual of the printer how to
do this. Then you can print the job again, without perfect binding.
Job cannot be perfect-bound error scenario
Chapter 5 - Troubleshooting
63
Advertisement
Table of Contents
