Neck - Grizzly H7582 Instruction Manual

Neck

Components Needed
Guitar Neck ....................................................... 1
Guitar Body ....................................................... 1
Neckplate ........................................................... 1
Silver Screws #7 x 1 3 ⁄ " ..................................... 4
4
The neck is pre-finished and is ready to install.
To attach the neck to the guitar body:
1. Place the neck into the neck pocket (Figure
9). If the neck does not fit into the pocket,
lightly sand the high points on the neck until
it fits.
Figure 9. Neck installation.
-10-
2. Place the neckplate over the neck pocket
holes and thread four #7 x 1
(Figure 10) through the guitar into the neck.
DO NOT use glue, since you may want to
Qty
remove the neck for maintenance and tune-
ups.
Figure 10. Neckplate installation.
Model H7582 Junior Electric Guitar Kit
⁄ " silver screws
3
4