Table of Contents
Advertisement
Pull the wall bracket fixing part forward. Two people are required to install the product on the assigned area of the wall bracket.
For managing the power cord and other cables for peripheral equipments, bundle the wires
by using the supplied wire fixing tool. Be sure the wires are not unbundled or came off when
rotating or operating.
Insert the cables and pull the angle adjustment bracket forward. Arrange the wires by using
the hole to avoid the interference with wires when rotating the set.
Check the operation 2 ~ 3 times and fix the wall molding if it works properly.
Wall Bracket Angle Adjustment
The smooth moving mechanism is applied to this product to move the product smoothly for
convenience.
Slim, Normal LED
Do not adjust the angle with force. The product can be damaged if it is
too close to touch the wall.
Hold the left and right side of the product when you want to adjust the
left and right angle.
Hold the top center to adjust the down angle.
You can adjust the angle to left, and right side between 20º ~ -20º, to
down side to 10º ~ 15º.
The adjustable angle range may be vary depending on the model.
W
a
r
n
i
n
g
W
a
r
n
i
n
g
Install the LED set to the wall
bracket and rotate the 2 safety
pins on the upper part to fix.
Ultra-Slim Only
Advertisement
Table of Contents
