Installation And Operation; Installation Overview; Mounting The Transceiver - Extron electronics FOX 3G HD-SDI User Manual

Installation and
Operation
This sections details the installation of the FOX 3G HD-SDI, including:
•
•
•
•

Installation Overview

Follow these steps to install and set up an Extron FOX 3G HD-SDI for operation:
1.
2.
3.
4.

Mounting the Transceiver

CAUTION:
Detailed mounting instructions can be found in the
1 inch high, quarter-rack width FOX 3G HD-SDI transceiver can be placed on a tabletop,
mounted on a rack
projector
•
•
•
•
•
•
•
•
•
•
Installation Overview
Mounting the Transceiver
Connections and Settings
Operation
Turn off all of the equipment. Ensure that the video sources and the output display are
all turned off and disconnected from the power source.
Mount the transceivers. See
Connect the cables and configure the transceivers. See
Plug in the power supplies, then turn on the display devices and the input devices.
Installation and service must be performed by authorized personnel only.
shelf, mounted under a desk or
bracket. Use the applicable optional hardware:
RSF 123 3-inch deep rack shelf kit (part #60-190-20)
RSB 123 3-inch deep rack shelf (part #60-604-21)
RSU 126 6-inch deep universal rack shelf kit (part #60-190-10)
RSB 126 6-inch deep basic rack shelf (part #60-604-11)
RSU 129 9.5-inch deep universal rack shelf kit (part #60-190-01)
RSB 129 9.5-inch deep basic rack shelf (part #60-604-02)
MBU 125 Under-desk mount kit (part #70-077-01)
MBD 129 Through-desk mount kit (part #70-077-02)
PMK 300 pole mount kit (part #70-374-01)
PMK 350 low profile multi-product pole mount kit (part #70-563-02, -03)
Mounting the Transceiver.
Connections and
Reference Information
tabletop, or
FOX 3G HD-SDI • Installation and Operation
Settings.
section. The
mounted on a
5