Fiber Compatibility Indications; System Operation - Extron electronics FOX 3G HD-SDI User Manual

Fiber Compatibility Indications

You must use the proper fiber cable for your transceivers. Each transceiver indicates its fiber
compatibility, singlemode or multimode, at power-up by blinking the four Rate indicators.
•
Multimode — The Rate LEDs blink once.
• Singlemode — The Rate LEDs blink twice.
NOTES: • To determine the fiber cable type, observe the cable jacket. Typically,
singlemode fiber cable has a yellow jacket and multimode fiber cable has an
orange or aqua jacket.
• All transceivers in the system must be the same model (all singlemode or all
multimode). Mixed transmission mode units will not work together.
FOX 3G HD-SDI • Installation and Operation 9