If you have only 1 telephone wall jack, insert the telephone cable into the
port labeled "TEL. LINE" found on the rear of the Docking Stati on Charger,
and insert the other end into a telephone wall jack (if you have telephone
service). Then, keeping your existi ng telephone cable connected to your
home phones' base unit, connect the other end into the second port labeled
"TEL. LINE".
NOTE: • The Docking Stati on Charger performs a self-diagnosis. The Power light (see page 7) will indicate that the
power is on.
• Under normal usage, the Docking Stati on Charger relies on the external power adapter for its power supply.
Insert the wall charger cable into the wall charger cable connector, and plug the unit into a standard outlet.
• Back up batt ery power will only be used during power failure or if the external power adapter is not in use.
The Docking Stati on Charger will not charge the back-up batt ery when the Personal Wearable Device is
docked.
• The Personal Wearable Device and telephone cable are for indoor use only.
12