Guest Trolling Charger 2607A Owner's Manual page 9

Output
Model
Volts
2610A
12
Diagram 6: 2610A (5/5 Amps) used with 2 12V Batteries
2610A Connections: The 2610A can be used on 2 12 volt independent batteries.
It may NOT be used for a 24 Volt system, the outputs may NOT be wired in
series. The 2610A may be used to charge one single battery. When doing
this, a 12 Gauge jumper wire must be added between output posts DC +
#1 and DC + #2. See diagram below.
2610A Connections
Output DC Cable
Banks
Amps Size
5/5 2
Size (inches)
L x W x H
N/A 4.25 x 7 x 2.42
14 or 15 AMP FUSE FOR EACH CUTPUT.
9
Input
Input Volts
Amps Max
115VAC
2.5 Amps
50/60Hz