Water Balancing - Premium Leisure Leisure Edge LE852 Owner's Manual

valve counterclockwise to increase the air mixture and clockwise to turn it
off.
To minimize heat loss, close the air control valve when the hot tub is not in
use.
6. Press the JETS button a third time to turn off pump 1.
Note: The pump remains on if filtration or heat is needed.
7. Press the LIGHT button to turn on all lights. Verify that the LED light system
is on. Press the LIGHT button multiple times to cycle through the many
available color patterns. Press the LIGHT button again to turn off the LED
light system.
8. If equipped, press the "AUX" button. You should hear pump 2 turn on, see
water circulating, and see the AUX light illuminate on the panel.
9. Press the AUX button again to turn off pump 2.
W a t e r B a l a n c i n g
Note: If your Leisure's Edge hot tub comes with a built-in SPA
FROG(optional) sanitizing system. Depending on the area you live
in and the local regulatory rules, your SPA FROG consists of some
combination of a mineral cartridge and a bromine cartridge
manufactured directly in the plumbing line of your hot tub. Here's
how it works:
The SPA FROG In-Line System is made up of (A) a FROG cap that is
easily distinguishable among the fittings on the top of the spa, (B) a
cartridge holder that pulls out of the system, (C) a mineral cartridge
that controls bacteria in the water and (D) a bromine cartridge that
helps support the minerals while oxidizing contaminants like body
oils. The cartridges are adjustable to meet your specific spa water
care needs.
Page 25
For HELP, call 727.573.9611