Operating Instructions; Setting The Clock And Calendar; Setting The Alarm Time; De-Activating The Alarm - Springfield Precisetemp 91905 User Manual

walls, metal doors, metal framed windows, thick concrete, stone or brick may reduce the transmission range. To
optimize the transmission distance, the base and remotes should be positioned in locations that minimize these
obstructions. Interference from other sources such as home security systems, wireless doorbells and wireless home
entertainment equipment may interrupt the transmission signal temporarily.

In areas of extreme low temperatures (below 0°F), re-locate the remote sensor indoors and use a remote sensor wire.
The sensor wire is not included with the unit and can be purchased separately by contacting Taylor Customer Service
at 1-866-843-3905. Plug the sensor wire into the remote and route the wire through a nearby window. Be sure to
plug in the wire securely. Note: The sensor wire will transmit outdoor temperature only, not humidity.

OPERATING INSTRUCTIONS

Setting the Clock and Calendar


Press and hold the SET AL button until the hour is flashing.

Press UP/C/F or DOWN buttons to adjust the hour

Press SET AL and the minutes will be flashing

Press UP/C/F or DOWN to adjust the minutes

Press SET AL and the year will be flashing

Press UP/C/F or DOWN to adjust the year

Press SET AL and M / D will be flashing

Press UP/C/F or DOWN to select either a Month / Day (M/D) or Day / Month (D/M) calendar format

Press SET AL and the month will be flashing

Press UP/C/F or DOWN to adjust the month

Press SET AL and the day will be flashing

Press UP/C/F or DOWN to adjust the day

Press SET AL and 12h or 24h will be flashing

Press UP/C/F or DOWN to select either 12 or 24 hour timing

Press SET AL to lock in the settings

Setting the Alarm Time

Two different alarm times can be set, Alarm 1 and Alarm 2. Use the MODE button to scroll from normal time display to
Alarm 1 (A1) to Alarm 2 (A2) then back to normal time display.

To set Alarm 1; In normal time mode, press the MODE button once and the Alarm 1 time and (A1) will show

Press the SET AL button for 3-4 seconds until the alarm hour flashes

Press UP/C/F or DOWN to set the alarm hour

Press SET AL and the minutes will be flashing

Press UP/C/F or DOWN to set the alarm minutes

Press SET AL to lock in the settings. The alarm is now activated and the alarm bell icon
the time.

Press MODE to get to Alarm 2 or to return to normal time display

If no buttons are pushed, the normal time display will show in approximately 20 seconds

To set Alarm 2; In normal time mode, press MODE twice and the Alarm 2 time and (A2) will show

Follow the same setting sequence as for Alarm 1

De-activating the Alarm

To de-activate an alarm, press MODE to choose the alarm (A1 or A2) that you want to de-activate. Press SET AL until
the alarm bell icon
alarms by following the instructions below.

Activating the Alarm

Press the MODE button to choose the alarm (A1 or A2) that you want to activate. Press SET AL to activate (the alarm
bell icon and 1 or 2 will show). The alarm will sound at the time you have entered.
is no longer showing. Your alarm time settings will remain and you can re-activate the
will show next to
Page 4