Table of Contents
Advertisement
Video or S-Video Signal Selection
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
✔
Note:
When Auto is selected for the System menu, PAL-M and PAL-N cannot be selected.
Component Signal Selection
Auto
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format from
among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i/50, and
1080i/60.
AV System Menu (Video or S-Video)
AV System Menu (Component)
System
Move the yellow
frame pointer to a
system and press
the SELECT button
to activate it.
Move the pointer to
a system and press
the SELECT button
to activate it.
39
Advertisement
Table of Contents
