Table of Contents
Advertisement
32
Looping Outputs
The 8/16 Channel DVSe has up to 16 looping outputs. Depending on the destination of the looping outputs, each one may have to be
terminated.
CH 1 in
CH 2 in
CH 3 in
CH 1 Out
CH 2 Out
CH 3 Out
The 32 Channel DVSe has up to 32 looping outputs. Connect the included 16 Channel BNC Connector Cables to the 16 Channel Cable
Adapter ports.
The video inputs/outputs are 75 Ώ BNC connectors. Make sure there is a video source connected to the input and then connect a cable to the
Channel Out on the BNC Connector Cable. The looping outs can be connected to video monitors or combined with adapters to connect to
VCRs.
Looping Output Termination
When it is necessary to terminate a looping output, the recorder has built in termination that allows users to select individual outputs. It is not
always necessary to terminate the output; it depends on the device to which you are connecting. As a rule, if the image appears distorted or
virtually unviewable, it likely needs to be terminated.
Always leave the dipswitch set to the ON position when the Looping Outputs are not used.
CH 4 in
CH 5 in
CH 6 in
CH 7 in
CH 4 Out
CH 5 Out
CH 6 Out
CH 7 Out
CH 8 in
CH 9 in
CH 10 in
CH 11 in
CH 8 Out
CH 9 Ou t
CH 10 Out
CH 11 Out
CO
S E N
ON
Not connected to a monitor (Normal)
OFF
Connected to a monitor (Looped)
CH 12 in
CH 13 in
CH 14 in
CH 15 in
CH 12 Out
CH 13 Out
CH 14 Out
CH 15 Out
O
N
O
F F
B N
C
A
O
N
O
F F
B N
C
B
ROL
N
T
CO
M
1
2
3
4
S O
R
CH 16 in
C H 16 Out
Advertisement
Table of Contents
