Operating Instructions - Dometic NEA1402 User Manual

Autodefrost
Table of Contents

Advertisement

operating instructions

turning on the refrigerator
nea1402
Turn on the refrigerator by pressing the ON/OFF
button.
nda1402
6
wARNINg
!
FIRE HAZARD. Before lighting the gas burner,
after that the RV has not been used for some time,
please check that the gas path between the burner
jet and the burner tube has not been obstructed.
Failure to heed this warning could cause a fire re-
sulting in personal injury.
BURNER MOUNTING
SCREWS
BURNER JET
BURNER TUBE .
SPARK ELECTRODE
1.
Before turning on the refrigerator, please verify that
all the manual gas valves, including the manual shut
off valve, are in the oN position.
2.
Turn on the refrigerator by pressing the
button.
settings
setting the defrost timer
NOTE! The defrost timer must be set in order for the automat-
ic defrosting system to work properly. For further information,
see
REFRIGERAToR oVERVIEW > AUTomATIC DEFRoSTING
. If the defrost timer has to be set, the lED panel will
SySTEm
show flashing horizontal bars " -- -- ".
PM INDICATION
1.
To enter TImER mode, press and hold the
ton until the hour digits start flashing.
2.
Adjust to local or Central American time as follows:
Press the
SET button repeatedly to select the
-
desired hour setting. Be sure to set Am or Pm cor-
rectly! The PM option is indicated by a lit dot on
the display. Save setting by pressing the STORE
button. The minute digits will start flashing.
Press the
SET button repeatedly to select the
-
desired minute setting. Save setting by pressing the
STORE button. The display will now return to
show the current temperature in freezer and fridge.
SOLENOID VALVE
INLET FITTING
MANUAL SHUT OFF VALVE
Shown in open position
PRESSURE TEST PORT
ON/OFF
HOURS
MINUTES
SET but-
setting the thermostat range
NDA1402 - TEmPERATURE cONTROL
The freezer and the fresh food compartment temperatures are
controlled separately and independently of each other, based on
the actual air temperature in each compartment. The compart-
ment temperatures will be the same regardless of ambient
temperature or setting in the other compartment.
The freezer setting is pre-set (can not be changed) to be ap-
prox. 0°F (-18°C) when running on AC. If running on GAS
the pre-set temperature is approx. 7°F (-14°C).
The fresh food compartment can be set in 5 different posi-
tions (1-5) where 5 is the coldest setting which gives a fresh
food temperature of approx. 33°F (0°C). Setting 3 gives a
temperature of approx. 37°F (3°C).
SET button to set the thermostat. Thermostat
1.
Press the
range is 1 to 5, where 5 represent the coldest compart-
ment temperature.
2.
Press the
STORE button to store or use the automatic
storing function (wait 5 sec.).
manual defrosting
The refrigerator can be set to defrost at any time. Usually a de-
frost cycle takes about 1 hour but is depending on the amount
of frost and could therefore vary from time to time.
1.
Switch off the refrigerator with the
2.
Press and hold the
ON/OFF button. "dE Fr" is displayed.
nda1402 - selecting energy mode of
operation
Current mode of operation and energy source (AC or GAS) is
indicated by a dot on the LED panel.
Press the STORE button to select AUTo mode opera-
tion or lock up to lP-gas mode operation only.
- 6 -
ON/OFF button.
STORE button. Then, press the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nda1402

Table of Contents