Sensor Setup; Configure Sensor Response - Surveillix XVS4-120-X User Manual

SENSOR SETUP

The Sensor setup window allows you to enable, disable and configure Sensors and Relays (Control Outputs).
Associate Sensor w/ PTZ Presets
Open On-Screen Keyboard
Normally Open (NO) /
Normally Closed (NC)
Delay Triggering Relay Output

Configure Sensor Response

1. Click Setup on the Display screen.
2. Click Sensor.
3. Click the NO or NC check box to select Normally Open or Normally Closed for the desired sensor.
4. Enter the Delay time to define the number of seconds after the sensor is tripped until the relay is activated.
5. Enter the Relays to associate with the sensor. One or more relays can be associated with a single sensor – separate with
commas.
6. Click Apply.
Configure Hybrid (IP) Sensors*
Assign Relay(s)
comma delineated
83