Bunn JDF-2 Use & Care Instructions

DISPENSER USE

STEP 1
PRESS AND HOLD MODELS:
Place a cup on the drip tray
beneath the desired dispensing
nozzle.
BUNN
®
JDF-4
DO NOT ALWAYS WA ! RNI
DO ADAPTO DEFORM ELECTR OVERLO FOLLOW KEEP NOT OR ICALLY R PLUG. AD CIRCUIT NG
FAILUR COMBUS NATIONA TIBLES L AND OR GROUND PLUG . THE
0 0 READ DAMAG E, THE E TO FIRE COMPL AWAY. LOCAL Y RISKS CORD. ELECTR CHASSIS
6 2E 8 9 BEFOR 0 . 0 0 E USING 9 / 5 9 1 © 8 ENTIRE OPERA SHOCK OR EQUIPM ICAL CODES.
B n n O - THIS 4 9 u PRODU TING M - atic HAZAR D. ENT MANUA
r o pora C i t CT n o L
INSTALLATION & OPERATING MANUAL
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
www.bunnomatic.com
33854.0000 08/03 ©2001 Bunn-O-Matic Corporation
STEP 5
The dispense times can be
individually programmed by fol-
lowing the procedures described
in ADJUSTMENTS - Cup Size Pro-
gramming listed in the Operating
and Service manual.
37784.0000A 10/04 ©2004 Bunn-O-Matic Corporation
JDF-2 & JDF-4 JUICE DISPENSER
USE & CARE INSTRUCTIONS
STEP 2
Press and hold the "Product Dis-
pense" or "Chilled Water" switch
until the beverage/water reaches
the desired level, then release.
STEP 6
To stop a timed dispense, mo-
mentarily press the "+/Stop
Switch"
STEP 3
PORTION CONTROL MODELS:
Place a cup on the drip tray
beneath the desired dispensing
nozzle.
STEP 7
To "Top Off" a beverage, press
and hold the "+/Stop Switch"
until the beverage reaches the
desired level, then release.
STEP 4
Momentarily press the appro-
priate cup size switch to dispense
the beverage. The dispenser is
factory preset to produce the
following sizes:
Small
(4.0 seconds): 7 fl.oz. (207 ml)
Medium
(6.9 seconds): 12 fl.oz. (355 ml)
Large
(9.1 seconds): 16 fl.oz. (473 ml)
STEP 8
To dispense chilled water, press
and hold the "Chilled Water
Switch" until the water reaches
the desired level, then release.
37784 102904