Charging The Battery; Charging The Battery Using The Usb Cable - Unitech PA600 User Manual

Rugged enterprise pda

Hide thumbs Also See for PA600:

Table of Contents

Chapter 1

Getting Started

Charging the Battery

Before using the PA600 for the first time, you need to charge it for about 16 hours.

After that, you can charge the PA600 4 hours to recharge the battery to full capacity.

Charge the PA600 using the USB charging cable or the docking station.

CAUTION!

Operating the PA600 for the first time without the AC adapter, and

without fully charging the backup battery may result in loss of data

stored in RAM memory. When the main battery is removed, the

backup battery retains RAM data in memory for 2 hours, please

charge the battery for the period to avoid the data loss in RAM mem-

ory.

NOTE:

Data you entered may not be properly stored until the built-in backup

battery has been adequately charged.

1. Press and hold the connector button on the USB charging cable and connect it

to the PA600 (1).

2. Plug the AC adapter cable into the power jack on the USB charging cable (2).

3. Connect the AC adapter into an electrical outlet (3).

Table of Contents

Do you have a question about the PA600 and is the answer not in the manual?