Table of Contents
Advertisement
Parameter
Wireless Network Key(WEP)
Network Key
Confirmed Network Key Enter the same network key again to cofirm the key.
Key Index(Advanced)
Enable IEEE 802.1x
authentication for this network
This is a comupter-to-
computer(ad hoc) network;
wireless access points are not
used
3.3
Advanced Configuration
This screen allows you to do some advanced configuration including Power Save Mode,
Encryption Algorithm and some specific settings for the adapter.
Description
If the network is required for Wired Equivalent Privacy (WEP) key,
type the key in the text box. The key should be 10 or 26
hexadecimal characters according to the WEP mode designated
by the network.
Note: The hexadecimal characters include the range of "A-F", "a-
f" and "0-9", for example: "0123456aef" or
"01234567890123456789abcdef".
Select one of the four keys to encrypt your data.
IEEE 802.1x authentication provides enhanced security for
wireless network. If the wireless network requries IEEE 802.1x
authentication for accessing to the network, please select the
check box.
The "EAP-MD5 Authentication" screen (see the screen above) will
appear when you attempt to conenct the wireless network which
requires for IEEE 802.1x authentication. Please enter the user
name and password which your network administrator assigns to
you.
Note: This adapter only supports EAP-MD5 algorithm of the IEEE
802.1x authentication method when running in Windows
98SE/Me/2000/XP operating systems. Windows XP supports more
algorithm of IEEE 802.1x such as EAP-TLS, please uses the
Windows XP built-in Utility if you need to use the authentication
method other than EAP-MD5.
In Computer-to-Comupter mode (Ad Hoc), wireless stations
connect to each other directly, no Access Point is required. If the
wireless network you selected is in Ad Hoc mode, select this
check box.
11
Advertisement
Table of Contents
