Table of Contents
Advertisement
Parameter
Available Wireless Network(s)
Configure Button
Refresh Button
Available Profile(s)
Add Button
Remove Button
Set Default Button
Signal Strength
Signal Quality
Description
If you are unable to conect to an existing wireless network, click
the network name and then click this button. The "Wireless
Netowrk Properties" will show up for you to configure the adapter
and ensure the settings are correct.
To update the list of available networks, click the
"Refresh" button.
This list shows the preferred networks for the wireless connection.
You can add, remove, edit the preferred networks or set one of
the networks as the default connection.
To configurate a new profile, click "Add" button.
To remove a wireless network from the available profiles list, click
the button.
To designate a wireless network as the default network for the
connection from the available profiles list, click the button.
This bar shows the signal strength level. The higher percentage
shown in the bar, the more radio signal been received by the
adapter. This indicator helps to find the proper position of the
wireless device for quality network operation.
This bar indicates the quality of the link. The higher the
percentage, the better the quality.
9
Advertisement
Table of Contents
