To Arm The System; Mute Alarm - Carpal LX24 User Manual

3-button transmitter:
-- Button A

1. TO ARM THE SYSTEM

after the vehicle is parked and doors are closed ( ignition switch is off). The system will respond with one
siren chirp and one headlight flash, doors will lock (provided the central door locking system is installed in
your vehicle), windows roll up automatically (provided the power window system is installed and windows
are not closed). 5 seconds later, the engine starter will be disabled and the engine will not start even using the
ignition key. LED status indicating light will begin flashing slowly. Now your vehicle is in the protection of
this alarm system. The system begins detecting ACC, foot brake and doors. The shock sensor begins working
after 30 seconds .
2. THE SYSTEM TRIGGER REACTION In arming mode, if the vehicle is impacted or doors are forced
open or ignition is turned ON illegally, the alarm system will be instantly triggered and respond with siren
sounding sharply and lights flashing rapidly unless pressing button B on the transmitter to stop the siren sounding
lights flashing and disarm the system. There are two types of siren sounds according to different trigger: if it is
some slight intrusion like a force hit on the vehicle body or knocking on the window, the siren sounds
intermittently for 15 to 20 seconds (you can stop siren by pressing button C on the transmitter), but it will not
sound when it is in mute alarm mode. If it is some serious intrusion like the doors are opened by force and the
engine start is attempted (ignition is turned ON illegally), the siren keeps continuous sound even in mute alarm
mode unless pressing button B to disarm the system or pressing button C to stop siren temporarily.
3. TO DISARM THE SYSTEM While the alarm system is in the armed mode, you must disarm the system
before entering the vehicle , otherwise the alarm system will be triggered. To disarm the system, simply press
transmitter button B, the system will respond with two siren chirps, three headlight flashes, unlocking doors,
enable engine starter, LED indicating light turning off.
4. INTRUSION REPORT
that there was an intrusion by sounding the siren 4 times while disarmed. So you should look to see if there is any
danger inside the vehicle before getting in.

5. MUTE ALARM

alarm by pressing transmitter button D in disarmed mode (for 4-button transmitter, responds with one lights flash
and locking doors, rolling-up windows, engine disabled) or pressing and holding button C for 3 seconds after arm
the system (for 3-button transmitter, by responding one siren chirp). In this mute alarm mode, any slight intrusion
and vehicle locating won't activate the siren, but the serious intrusion (such as doors are opened or ignition switch
is turned on illegally)will trigger the siren. If you want to return to normal alarm mode, press button B to disarm
2
TRANSMITTER BUTTON ILLUSTRATION
-- Button B
STANDARD FUNCTIONS AND FEATURES
The alarm system can be activated by pressing button A on the transmitter
If the system is triggered while you are away from the vehicle, it will report to you
In some circumstances, if you don't want to the siren noise disturbance, you can mute the
4-button transmitter
-- Button C -- Button D