1. Manuals
  2. Brands
  3. Carpal Manuals
  4. Car Alarm
  5. LX24
  6. User manual

Carpal LX24 User Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
CAR ALARM USER'S MANUAL
This car alarm system is designed to provide not only all essential preventative security features but also
some user-convenience operations (such as trunk release, window-rolling up, lock/unlock doors, car finding)
with ease of operation and dealer installable high security and convenience options using the most advanced
technology.
After you purchase this car alarm, please check whether all systems parts are packed. Please see the
illustration table:
1.
Main unit
2.
Transmitters (normally two unless ordered with one)
3.
Special anti-robbery switch (green switch)
4.
LED status indicating light
5.
Reset switch (red switch)
6.
Shock sensor
7.
Starter-disable relay (to immobilize the engine)
8.
Electronic siren
9.
Wire harness (one 6 pin harness and one 9 pin harness)
10. Screws (used for mounting the main unit)
11. Ultrasonic sensor or microwave sensor (optional parts)
1
GENERAL DESCRIPTION
SYSTEM PACKAGE CONTENTS

Advertisement

Table of Contents
loading

Summary of Contents for Carpal LX24

  • Page 1 CAR ALARM USER’S MANUAL GENERAL DESCRIPTION This car alarm system is designed to provide not only all essential preventative security features but also some user-convenience operations (such as trunk release, window-rolling up, lock/unlock doors, car finding) with ease of operation and dealer installable high security and convenience options using the most advanced technology.

  • Page 2: To Arm The System

    TRANSMITTER BUTTON ILLUSTRATION 3-button transmitter: 4-button transmitter -- Button -- Button -- Button -- Button D STANDARD FUNCTIONS AND FEATURES The alarm system can be activated by pressing button A on the transmitter 1. TO ARM THE SYSTEM after the vehicle is parked and doors are closed ( ignition switch is off). The system will respond with one siren chirp and one headlight flash, doors will lock (provided the central door locking system is installed in your vehicle), windows roll up automatically (provided the power window system is installed and windows are not closed).
  • Page 3 then press button A to arm the system (for 4-button transmitter) or press and hold button C for 3 seconds ( for 3-button transmitter). If the system is disarmed via transmitter and any doors are not opened within 6. AUTOMATIC RE-ARM approximately 25 seconds, the system will automatically re-arm itself.
  • Page 4 normal state, it is not pushed down. When it is pushed down in a necessary situation, the alarm anti-hijack function will be engaged. Finally it will immobilize the vehicle engine so it avoids the robbery. This is normally used when it is not convenient for the vehicle owner to use the remote control or the remote control is not with him when the dangerous robbery is happening or the owner is forced to get out of the vehicle, he can secretly get the alarm main unit and push down the green button before he leaves and remember to close the door well after he leaves the vehicle ( must remember to close the door well, as the system will be activated as soon as the door is...

  • Page 5: Passive Arming

    PROGRAMMABLE FUNCTION AND FEATURES This feature is programmable. Factory setting is 1. PASSIVE ARMING (LAST DOOR ARMING ) “without”. If set “with”, when ignition is off, the driver leaves the vehicle and closes doors well, 25 seconds after, the system will be armed automatically. (if set “with” this feature, then the previous AUTOMATIC ARMING ALERT feature will be invalid).This is to protect your vehicle in the event you forget to arm the system using the transmitter.

  • Page 6: Tips For Troubleshooting

    be pull out straightly, don’t fold, cut short, or touch with other things. See Alarm System Wiring Diagram. 2. SHOCK SENSOR INSTALLATION After installing the main unit, mount the shock sensor under the dashboard and stick it closely to the inner wall of vehicle body without any shock pad. Please remember the position where the shock sensor is mounted.

  • Page 7: Main Unit

    a. check if the actuators work. b. Check if the central locking system connection with car alarm is correct. c. Check if the fuse is burn out. 3. The car alarm siren doesn’t sound when the system is triggered. a. check if the siren is normal. b.
  • Page 8 ALARM SYSTEM WIRING DIAGRAM Starter Special Anti-robbery Switch Relay Reset Switch LED indicator power window 2. trunk release ACC-ON 3.door trigger (negative) 4.Engine immobilizing 5. Ignition On 6. footbrake Shock sensor Ultrasonic sensor Brown direction light Footbrake Brown direction light Red power supply (+12V) 4.

Table of Contents