Table of Contents
Advertisement
20
Please note: Do not plug in both RS232 and USB cables. Doing so may cause
a driver conflict, making your touch screen idle.
If you are using USB connection on a PC using an operating system other than
®
Windows
Vista,, follow the instructions below:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
PT1505MU / PT1555MU Driver Install:
The touch driver is located on the enclosed CD-ROM for these
OS: Windows® VISTA, XP, 2000, 98.
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
Advertisement
Table of Contents
