Technical Specifications - Alto OEX900 User Manual

7. TECHNICAL SPECIFICATIONS

Mixer Section
Mono input channels
Stereo input channels
Impedances
Equalization
DSP Section
Main Mix Section
Microphone Input
Frequency response
Distortion(THD&N)
Gain
SNR(Signal to Noise Ratio)
Line input
Frequency response
Distortion(THD&N)
Gain
Line input
Frequency response
Distortion(THD&N)
Microphone Input
Channel Insert return
All other inputs
Tape out
All other outputs
Hi shelving
Mid bell
Low shelving
A/D and D/A converters
DSP resolution
Type of effects
Presets
Controls
Noise(Bus noise)
Max output
Controls
AUX Sends max out
Electronically balanced, discrete input configuration
10Hz to 55kHz,+/- 3dB
0.04% at +4dBu,1kHz
30dB
>94dB
Electronically balanced
10Hz to 55kHz,+/- 3dB
0.04% at +4dBu,1kHz
10dB
Unbalanced
10Hz to 55kHz,+/- 3dB
0.04% at +4dBu,1kHz
1.4kOhm
2.5kOhm
10kOhm or greater
1kOhm
120Ohm
+/-15dB@12kHz
+/-15dB@2.5kHz
+/-15dB@80Hz
24bit
24bit
Hall,Room,Vocal&Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus,Flanger & Reverb MODULATIONS
REVERB+DELAY,REVERB+CHORUS,
REVERB+FLANGER combinations
256
16-position PRESET selector
16-position VARIATION selector
CLIP LED
MUTE SWITCH with LED indicator
Fader 0 dB,channels muted:-85dBr (ref.:+4dBu)
Fader 0 dB,all input channels assigned and set to
UNITY gain:-81dBr(ref.:+4dBu)
+27dBu balanced
+22dBu unbalanced, 1/4" jacks
+22dBu
14