Cleaning Prior To Initial Use - Viva 7LIECH-SC-SSF User Manual

CLEANING PRIOR TO INITIAL USE

To remove any odors or dust that may collect during shipment, you must
clean dispenser prior to first use.
DO NOT PLUG THE COOLER INTO AN ELECTRICAL POWER OUTLET
Time Required: 40 minutes.
1. Remove bottle receptacle by turning it counter clockwise and
pulling up. Store in a safe place.
2. Remove plastic baffle from inside reservoir. Clean with warm
soapy water, rinse, then store in a safe place.
3. Fill reservoir with a mixture of 1 gallon tap water and 2
tablespoons of unscented household bleach.
4. Let sit for 30 minutes.
5. Dispense 1 cup of mixture through both faucets to clean out water ways.
6. Place a 2 gallon or larger bucket under the
drain plug in the rear of the dispenser. Remove
drain cap and silicon plug.
Reminder – Place drain cap and silicon plug in
a safe location so they are not lost.
7. Once unit has completed draining, empty the
bucket then return it to under the drain cap.
8. Replace drain cap and silicone plug.
9. Wipe inside of reservoir with a soft cloth.
10. Fill the reservoir with 1 gallon of tap water.
11. Dispense 1 cup of water through both faucets
to rinse out water ways.
12. Remove drain cap and silicon plug.
Reminder – Place drain cap and silicon plug in a safe location so they are not lost.
13. Remove remaining water from reservoirs by dispensing from both taps into a pitcher.
14. Replace all parts.
Reminder - Don't forget the silicon plug and drain cap.
15. Complete the installation and operation instructions within this manual. If your water
has an off taste. Do not return to store. Call 855-VIVA-111 for assistance.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 855-VIVA-111 for assistance.
7