Page 1
TX-SR500 Basic Operation Guide Introduction • This Guide describes basic operation of this receiver and connected devices (CD, DVD etc.). For further information about the advanced functions of this receiver, please refer to the main instruction manual. • This Guide does not explain connection details for the unit’s rear panel. Please refer to pages 10-16 of the main instruction manual for correct connection information.
Page 2
SP B The video appears on the monitor TV. To control an Onkyo DVD player 1 Make z connection (see page 16 of the main manual). 2 Press DVD, then press the desired operation button (see page 34 of the main manual).
Page 3
COAXIAL input jack of this unit, change the assignment of digital inputs to input sources by referring to “Setting the digital inputs” on page 22. Play a CD. 6.-2. To control an Onkyo CD player SP A/ 1 Make z connection (see page 16 of the main manual). SP B 2 Press CD, then press the desired operation button (see page 35 of the main manual).
Page 4
Enjoying the FM/AM radio Make sure that the power to the TX-SR500 has been turned on, and the antenna connections have been made correctly. (See pages 14 and 15 of the main manual.) Also, make sure that broadcast stations have been programmed as presets. (See PRESET page 25 of the main manual.)