To Pair The Unit To A Wireless Phone - Advent In - Dash Navigation Radio Owner's Manual

To Pair the Unit to a Wireless Phone:

1. Access the wireless phone Bluetooth
function and set the Bluetooth
function to on. (Please refer to
the wireless phone's instruction
manual to enter Bluetooth setup,
turn Bluetooth on/off , and perform
pairing).
2. Set your wireless phone Bluetooth
discovery mode to on.
NOTE: Some discovery modes have
a time limit before they are
automatically turned off .
3. Press the front panel PHONE button
or press the Main Menu Bluetooth
icon to access the Bluetooth Screen.
4. Turn Bluetooth on.
5. On the unit's Bluetooth Screen,
press the Device icon. An Inquiry
screen appears. The unit will search
for devices. Press the Search icon
to look for new phones if yours is
not discovered by the unit. Upon
completion of the search, the
following screen appears:
48
6. Press the Search icon. The following
screen appears:
7. Press the wireless phone identifi er
that you want to pair. The following
screen appears:
8. Enter the passkey for the unit. The
default passkey for the unit is "1234".
Press the Enter (
9. At this point the wireless phone
will ask you to respond to a prompt
similar to "Pairing request from
_______ Accept? Yes or No ". You
should answer Yes to the request.
10. Enter the passkey for the unit. The
default passkey for the unit is "1234".
The wireless phone and the unit
should pair.
) icon.