Adjusting The Navigation Voice Volume - Advent In - Dash Navigation Radio Owner's Manual

Step 4 - Select a Destination:
You have many ways to select a
destination. Select by touching screen:
• Tap to select your
destination by entering an address
or selecting a place of interest, a
location on the map or one of your
Favorite destinations. You can also
look up your recent destinations from
the Smart History, enter a coordinate
or use the location saved in a photo.
• Tap to display the
route parameters and the route in its
full length on the map. You can also
perform route-related actions such
as editing or canceling your route,
setting a start point for the route,
picking route alternatives, avoiding
parts of the route, simulating
navigation or adding the destination
to your Favorites.
• Tap to customize the
way the navigation software works,
watch the Tutorial, simulate demo
routes, or to run some additional
applications.
• Tap to start navigating
on the map. The button itself is a
miniature live map that shows your
current position, the recommended
route and the surrounding map area.
Tap the button to enlarge the map to
the full screen.
40
Step 5 - Map/Guide Along Route
Proceed to the highlighted route and
drive while the iGo primo software
provides guidance to your destination.
Step 6 - Arriving at Your Destination
When you are near your destination, the
destination is indicated by a
checkered fl ag symbol
ADJUSTING THE NAVIGATION VOICE
VOLUME
While the Navigation is on and a route
has been programmed, the Navigation
will speak commands. While the
Navigation is speaking, adjust the
volume by turning the radio volume
knob.
.