Mirage PF6 User Manual page 22

at Power Up
7 Speed Pot
Error
8 Motor Volts
Error
9 Other Internal
Errors
10 Push Too Fast
fault
Note:
If you experience any technical problems, it is recommended that you check with your local dealer before
attempting to troubleshoot on your own.
The following symptoms could indicate a serious problem with your power scooter. Contact your local dealer if
any of the following arises:
1. Motor noise
2. Frayed harnesses
3. Cracked or broken connectors
4. Uneven wear on any of tires
5. Jerky motion
6. Pulling to one side
7. Bent or broken wheel assemblies
8. Does not power up
9. Powers up, but does not move
inhibited key on. Return throttle to neutral, turn power off and
back on again. Throttle may need to be re-calibrated
Check throttle wiring.
Drive The throttle or its wiring is faulty. Check for open or
inhibited short circuits.
Throttle may not be correctly set up. Contact your
service agent.
Drive The motor or its wiring is faulty. Check for open or
inhibited short circuits.
Contact your service agent.
Drive Contact your service agent.
inhibited
Drive The scooter has been pushed faster than the
inhibited programmed "Push Speed' parameter when the Park
Brake Release function has been operated. The
scooter has been pushed faster than the programmed
"Rollaway Speed" parameter when the Park Brake
has been mechanically released. Turn the scooter off
and then back on again.
20