Operation Of Control Panel - Mirage PF6 User Manual

OPERATION OF CONTROL PANEL

The power scooter is simple to operate. However we recommend that you read carefully the following
instructions to become familiarized with your new vehicle.
Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select your
desired speed. For indoor environments we recommend that you select the slowest speed setting. For
outdoor operation of this vehicle we recommend that you select a speed that is comfortable for you to
control it safely. The following steps are required to operate your vehicle safely with the controller
Battery Indicator
I / O Button
Headligh t
Left Signal Light
Button functions
1. Battery Indicator: When your scooter is switched on, the needles on the meter will move across
the scale from the left 'red' sector towards the 'green' sector, indicating the state of charge in your
batteries. As the power is used up in your batteries the needle will move towards the 'red' sector
indicating the state of charge at that precise time. When the needle is fully over to the right, the
batteries are fully charged. When the needle falls towards the red sector your batteries are losing
power, but you will still have power to spare. When the needle falls into the red sector your
batteries are low in power and need to be recharged. It is wise to recharge your batteries when the
needle enters the red zone (see Batteries and Battery Charging section of this manual).
Horn
10
Speed Adjuster
Power ON/OFF Light
Key
Hazard Light
Right Signal Light