Mirage PF6 User Manual page 14

Driving: Controller ON/OFF Switch
1. Insert the key to turn the scooter power on (Turn the power off and remove the key). Push the
finger lever control forward or backward to control the driving direction of the vehicle.
KEY
(Fig 11)
Returning of the finger lever control to its neutral position(center), will reduce the speed and stop
the vehicle by automatically applying the electromagnetic brakes.
2. Speed Control:
 Press "I / O " button (H/L gear mode): Automatically change H gear to L gear or from L to H gear.
(Press O on H gear, press I on L gear)
 Turn the speed adjuster knob clockwise towards maximum to increase your speed, and
counter-clockwise toward minimum to slow down your speed.
 Wig-wag Controlling.
The wig wag lever control also controls the speed of your vehicle. The further away (forward/
backward) the finger lever control is from the neutral position, the faster the vehicle will go.
Notes:
→After inserting the key into controller ON/OFF port, the light of power ON/OFF will turn on for
a few seconds during self checking process.
→In case of emergency, let go of the finger lever control and the vehicle will come to a stop.
(Fig 12)
12
Wig-wag