Using Wi-Fi Direct - Zte Imperial User Manual

keep Wi-Fi on in sleep mode.
 Avoid no internet connections: Only use
Wi-Fi networks that have Internet connection.
 MAC address: Check the MAC address.

IP address: Check the phone's IP address.

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each
other without the need for wireless access points
(hotspots).
NOTE: Activating this feature will disconnect your
current Wi-Fi network connection.
Connect to another Device via Wi-Fi
Direct
1. Touch the Home Key > Menu Key > System
settings > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the ON
position.
3. Touch the Menu Key > Wi-Fi Direct. Your phone
will search for other devices enabled with Wi-Fi
direct connections.
4. Touch a device name under PEER DEVICES to
connect with it.
The other device will receive a Wi-Fi Direct
connection prompt and need to accept the
request for connection. Both devices may need to
enter a common PIN.
5. Once connected the device is displayed as
"Connected".
43