Interface Description; Installation; Inserting The Modem - Zte MF10 User Manual

Interface Description

1. WPS: WPS button is used to start Wi-Fi Protected Setup authentication process.
2. LAN 1: Ethernet connections to computer.
3. LAN 2: Ethernet connections to computer.
4. POWER Socket: Connection to the external power supply.
5. POWER Switch: Turn the router ON or OFF. Hold on for 7 seconds to restore the factory default
settings.

Installation

This section shows you how to install the hardware.

Inserting the modem

Insert the modem into the router.
1. Rotate the front cover.
2. Plug the USB connector into the USB port.
13