Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Quick Guide Introduction ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere. Specification Data Service HSPA: DL 14.4 Mbps UL 5.76 Mbps...
Hold it for about five seconds to activate the WPS process. Hold it for about two seconds to enable/disable Wi-Fi function. 2.Charger/USB Charge your device. port Connect the client to your device via USB cable. 2 Confidential and Proprietary Information of ZTE CORPORATION...
NO network service No SIM low power mode. LED off Hardware Installation Inserting SIM Card, Memory Card and Battery 1. Use the thumb catch on the device to open the battery cover. Confidential and Proprietary Information of ZTE CORPORATION 3...
Page 6
SIM card, if not, the device or SIM card may be damaged. 3. Insert the memory card into the memory card holder. 4. Insert the battery as shown with the contacts located against the gold springs. 4 Confidential and Proprietary Information of ZTE CORPORATION...
1. Insert the charger lead carefully with the correct orientation to the charger port. The plug only fits one way. Do not use excessive force to insert the plug. 2. Connect the charger to a mains socket. 3. Disconnect when the battery is fully charged. Confidential and Proprietary Information of ZTE CORPORATION 5...
Mixed Mode: Connect to the device with the above two connection methods. The following picture is the application example. All of the client devices can surf on the Internet at the same time. 6 Confidential and Proprietary Information of ZTE CORPORATION...
Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP address like”192.168.0.101”. 4. Select the SSID of your device, and then click Connect. Confidential and Proprietary Information of ZTE CORPORATION 7...
You can browse the WebGUI Configuration page and select Settings > 3G Settings > Network Select to set the WAN connection mode. Access the WebGUI Configuration Page 1. Make sure the connection between your device and the client is correct. 8 Confidential and Proprietary Information of ZTE CORPORATION...
Page 11
It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (10.0 or later). The login page appears as follows. password “admin”, and then click Login to access the WebGUI 4.Input the case-sensitive default Configuration page. Confidential and Proprietary Information of ZTE CORPORATION 9...
Click Logout to return to the login page. Click Connect to access the Internet. Click ZTE Corporation, ZTE Light Tab, Weather, Twitter, Facebook, or YouTube to access the predefined link, for the detailed information please consult you service provider. Notes: •Do not put anything on the top of your device.
Select Settings > Wi-Fi Settings View the current station list. Select Settings > USSD This function allows you to inactive with the service provider. Select Settings > STK Show some services which your (U)SIM card provides Confidential and Proprietary Information of ZTE CORPORATION 11...
Page 14
After logging in, select HotspotBook, and you can add a new contact by clicking the Add New tab, and perform operations to the contacts in the Device or SIM tab. SD Card Make sure that microSD Card is inserted. • Click SD Card to access the following figure: 12 Confidential and Proprietary Information of ZTE CORPORATION...
10 minutes and no action is performed to the device, or the WPS button is pressed manually, the device will enter the sleeping mode with the screen off. In the sleeping mode, the Wi-Fi function will be disabled. Confidential and Proprietary Information of ZTE CORPORATION 13...
Do not touch the inner antenna area if not necessary. Otherwise it will affect your device’s performance. • Store your device out of the reach of little children. Your device may cause injury if used as a toy. • 14 Confidential and Proprietary Information of ZTE CORPORATION...
This warranty does not apply to defects or errors in the Product caused by: • i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, Confidential and Proprietary Information of ZTE CORPORATION 15...
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-MF51. How to Get Help You can get Help by: Sending E-mail to mobile@zte.com.cn • Visiting http://www.zte.com.cn • Calling Service Hotline: +86–755–26779999 • Confidential and Proprietary Information of ZTE CORPORATION 17...
Need help?
Do you have a question about the MF51 and is the answer not in the manual?
Questions and answers