Quick Start; Set The Clock And Go - TOTALINE P374-1000 Owner's Manual

Quick Start

Set the Clock and Go

Press the Set Clock
button to enter Setup
SET CLOCK
screens.
I2:00
Setup
AM
Setup
Mo
Press the SET CLOCK
button to return to
normal operation.
The thermostat is preprogrammed from the
factory to operate 1 stage of cooling or 2 Stages
of heating equipment* without the need for further
programming. To optimize the installation of this
thermostat follow the instructions in the Advanced
Setup section.
* The thermostat is not preprogrammed from the
factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the
Advanced Setup section, pages 11 & 12.
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
I
Pressing the Up and Down
buttons will modify the flashing
selection.
Press
2
MODE
SET CLOCK
Page 5
To adjust the
clock or Day use
buttons.