Product View And Features; Video Game Consoles; Audio/Video Player; Testing Your Speakers/Enjoying Your Logitech Z-680 Speaker System - Logitech Z-680 Setup & Installation

Video game consoles

Digital Connection (PlayStation ® 2 or Xbox
For optimal sound, use an optical cable to connect the video game console to the optical jack on the
Digital SoundTouch ™ Control Center. If you are connecting the Z-680 system to an Xbox
need to purchase an adapter (the Xbox
make this connection.

Analog Connection (all consoles)

The Z-680 system is compatible with all video game consoles that use red and white RCA audio cables.
If you want to connect the Z-680 system to your video game console using an analog connection, you
will need to buy an adapter that connects the red and white audio cables from your console to the
green analog input jack on the Digital SoundTouch
audio signal will be directed to the front left and right speakers only.

Audio/video player

DVD or CD
Connect your DVD or CD player to the Digital SoundTouch
appropriate for your player.
Portable audio player
To use a portable audio player (such as a personal CD or MP3 player) with the Z-680 system, plug it into
the auxiliary input jack on the front of the Digital SoundTouch™ Control Center.
Testing Your Speakers:
Plug the power cord into a wall outlet and turn on the master power switch on the back of the subwoofer.
Access the speaker test feature by pressing the Test button on the wireless remote control. A test tone will
cycle through each speaker. While in your normal listening position, use the Sub, Center, or Surround +/-
buttons to adjust the speakers to your satisfaction. For optimal sound, each speaker should play the test
tone at the same volume level.
7
English
™ only)
™ , you will also
™ Advanced AV Pack or the Xbox ™ High Definition AV Pack) to
™ Control Center. With this type of connection, the
™ Control Center using a digital connection
Enjoying Your Logitech Z-680 Speaker System:
The Digital SoundTouch ™ Control Center gives you easy access to the numerous features of the Z-680
system. You can also access these features from the wireless remote control.
LCD display
1
The LCD display allows you to configure your listening environment. When idle, the LCD shows the input
and effect you are listening to.
Input
2
Use the Input button to select the audio source. Pressing the button will cycle through each of the three
source inputs: optical, coax and (6-channel) direct.
3 Effect
The effect button allows you to select music effects
to enhance your listening enjoyment. The Z-680
system supports the following effects:
• Dolby ® Digital
• DTS ®
• MPEG
• Dolby ® Pro Logic II Movie
• Dolby ® Pro Logic II Music
• 6 Channel Direct
• Stereo x2
• Stereo
For some types of input sources, including
6-channel digital audio sources such as Dolby ®
Digital, DTS ® and MPEG multi-channel, the effect is
automatically selected and cannot be changed.
However, for most 2-channel sources, you can
choose a desired effect. Use the Effect button to
cycle through the different choices, including:
Dolby ® Pro Logic II Movie, Dolby ® Pro Logic II Music, 6
Channel Direct, Stereo x2, and Stereo. Note that
the list of available effects can be limited depend-
ing on the input source.
1
2
5
10
9
8
3
4
6
7
8
English