Change Password; Activating Your Key Fob Remote; Activating Your Second Keypad - YY-Electron Wireless Home Security Alarm System User Manual

Changing the Password.
With your system in programming status
hear a double beep sound to indicate that it has been changed.
【 5 1  New Password

Activating Your Key Fob Remote.

Activating Your Second Keypad.

yy-electron.inc
(see page 5),enter the number below into your keypad/controller, You will
(must be 4 digits)
With your system in programming status
button 【 study 6
push any of the four buttons on your key fob remote. You will hear
two beeping sounds indicating that your remote control key fob is
now activated. Push EXIT to complete the process.
See page 15 for Key Chain Remote operation.
With your system in Programming
controller, push button 【 Study
Controller , and then push button【 1
your Second Entry Keypad
indicating that your second entry keypad is now activated. Push
EXIT to complete the process.
See page 17 for Second Entry Keypad operation.
# 】
(see page 5)
】 on keypad controller , and then
4 #
Status(see page 5)
6 4
2 3
. You will hear two beeping sounds
, push
on keypad
】on Keypad
#
4 】 on
4 #
6