Activating The Motion Detector / Pet Immune Motion Detector; Activating The Smoke Detector/Gas Detector/Glass Break Detector - YY-Electron Wireless Home Security Alarm System User Manual

Activating the Motion Detector / Pet Immune Motion Detector

process, Each motion detector has to be individually activated using this procedure.
【 study (01 to 05) # 】
Program Home Arm Feature for your motion. (this step is to make sure your motion detectors will be disabled when you
home arm the system).
with your system in programming status
to 05} enter the number you have chosen for the motion detector
【 7 2  (01 to 05) 3 # 】

Activating the Smoke Detector/Gas Detector/Glass Break Detector.

For each smoke detector/gas detector/glass break detector you use, choose a number from
2 digits). With your system in programming status
In the place of In the place of {01 to 08}, enter the number you have chosen for the sensor. After entering the pound
sign (#), you will need to physically trigger the smoking/gas detector/glass break detector to activate them. Activation
will be confirmed by a double beeping sound, Push button EXIT to complete the process.
【 study
(06 to 08)
yy-electron.inc
For each motion detector you use choose a number from
(notice: must be 2
in programming
the keypad/controller. In the place of {01 to 05} enter the number you
have chosen for the sensor. after the pound sign (#), you will need to
physically trigger the motion detector to activate it. On the motion
detector, switch the ON/OFF switch to the on position. Secondly,
physically move the motion detector about in front of an object as the
motion detector warms up; you will hear a double beep sound
indicating that it has been activated. Push EXIT to complete the
(see page 5), enter the number below into the keypad/controller. In the place of {01
(see page
# 】
digits)(see page
status(see page 5), enter the number below into
5), on your keypad enter the number sequence below.
01 to 05
7), with your system
06 to 08 (notice: must be
8