Troubleshooting - LENCO SCD-38 USB User Manual

Troubleshooting

Please refer to the following instruction when there are problems with the unit.
If the problem still exits, please consult your dealer.
Problem
The unit does not turn on
General
"- - -" or "nl" Appears in the
CD Player
CD does not play while the
radio continues to play on
The sound is weak or has
Radio
There is no sound
display
CD does not play
The sound drips out
battery power
poor quality
Remedy
Check the AC power cord.
Check the batteries
Check the FUNCTION switch.
Adjust the volume
Is the disk format supported?
Is the CD compartment closed?
Take out the CD and leave the
CD DOOR open for about an hour
to dry moisture condensation
Make sure the CD is not
scratched
Clean the CD
Make sure the FUNCTION switch
is at CD/USB/AUX IN position
If connected; disconnect the audio
cable from the AUX IN jack.
Clean the CD, or replace it if the
CD is badly damaged
Place the player in a location free
from vibration
Check if your batteries are okay
It is normal since the radio uses
less power than the CD player.
Replace the batteries to be able
to playback the CD again.
Replace all the batteries with new
ones, or bring the set near a
window, or rotate the set/antenna
18