EnGenius EP-436 User Manual page 41

Notes:
1. When entering a phone number, the cursor automatically advances
to the next digit field. Use Up and Down Arrows to move the cursor
backward or forward to insert (to the left of the cursor) or delete
(the digit above the cursor, or left of the cursor if cursor is on the
right of the last digit).
2. When entering a name, the cursor automatically advances to the
next character field if you press a different key for the next
character. If you need to enter consecutive characters from the
same key, you can wait for the cursor to advance or use the
Up/Down Arrow to move the cursor backward or forward manually.
Also use Up and Down Arrows to move the cursor to insert (to the
left of the cursor) or delete the character above the cursor, or left
of the cursor if cursor is on the right of the last character.
3. By default, all letters are entered in the upper case. Use the * key
to toggle between upper and lower cases. For example, pressing *
once will switch to the lower case for all subsequent letters.
Pressing * again will return to the upper case mode.
4. A "Pause" entry represents a 2.8 second delay in dialing the
following digits, which is useful when calling a sequence of
segmented numbers (e.g., access code, credit card number, auto-
attendant entries, etc.) Pause is entered by pressing the * key
twice (LCD displays P). Entering pause twice (PP) will result in 5.6
seconds pause in the dialing.
5. Character Table:
Key Characters and Orders
1
' + , . * ( ) & 1
2 A B C 2
3 D E F 3
4
G H I 4
5 J K L 5
6
M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
*
Toggle case when in character editing * P (Pause)
when in number editing
# Space when in character editing # when in
number editing, -
38