Table of Contents
Advertisement
Note:
1. Once enabled from the handset, all phone calls will be routed to
the designated number until disabled. A warning message will
appear on the LCD.
2. Intercom calls are not forwarded.
3.
Group calls are not forwarded.
10. Call Conferencing
a. 2-handset and 1-line conferencing
b. 1-handset and 2-line conferencing
11. DND (Do Not Disturb, i.e., Silent Ring)
12. User programmable Flash key timing
a. From an administrator handset (Handset 10 or 11), press
MENU-9-2-4 to select flash key timing.
b. 9-level (100 ms - 900 ms) timing selections.
Note: The default value (600 ms) works in most areas. Changing
this setting may cause Flash key not working. Change only
when you are certain of the new value would work.
13. Three Call Logs
a. Called Log: Stores 10 phone numbers (up to 28 digit each)
dialed most recently. Can perform last-number redial on all 10
Numbers.
b. Received Call Log: 10 entries (14-digit phone number, 14
-character names, and time stamp), needs Caller ID service
from local telephone company.
c. Missed Call Log: 10 entries (14-digit phone number, 14
-character names, and time stamp), needs Caller ID service
from local telephone company.
d. Phone numbers and names can be saved into phonebook while
in display.
14. Any Key Answer (except PWR, END, Silent Soft Key)
15. Keyguard
Prevents accidental dialing.
16. Dialing Prefix
Up to 14 digits, including pause(s), one access code can be pre
programmed to be added automatically in front of the dialed-
number when dialing from call logs, phonebook, and dial-and-
send dialing.
13
Advertisement
Table of Contents
